|No. A2713 Xinggang International Square Huangqi Jianshe Road Dali Town Nanhai District Foshan Guangdong Chinafirstname.lastname@example.org|
|Place of Origin:||FoShan China|
|Certification:||ISO SGS NQA ROHS|
|Minimum Order Quantity:||Negotiable|
|Delivery Time:||7 days|
|Payment Terms:||7days Western Union, T/T, L/C, MoneyGram|
|Colors:||Clear||Theoretical Coverage (mixed Complex:||12-14m2 /kg/coat|
|Shelf Life:||12 Months||Touch Dry:||20min|
|Hard Dry:||8 H||Dilution Ratio (Base: Thinner):||1: 1|
Non Toxic Wood Finish Super Nanotechnology Hydrophobic Paint Durable Peelable Coating
This product is a kind of single component waterborne wood decorative paint.
It is constructed by water thinning.It is safe,environmentally friendly and healthy.the product has excellent performance and has good decorative and protective properties for wood products.
Scope of application:indoor wood
products product characteristics
low odor;low VOC;no free TDI.
Excellent performance:strong adhesion;primer is good in grinding and filling;
topcoat lacquer.The handle is slippery,high hardness,scratch resistance,water
resistance,stain resistance and chemical resistance.Good,and resistant to yellowing.
Easy construction:add water to dilute,brush and spray normally.
Environmental performance:conform to indoor decoration and decoration
materials waterborne wood coatings safety standard GB24410-2009
Base materia lacrylic copolymer
Color:transparent,translucent,white and can be substituted for all kinds of colors.
General dry film thickness:25 microns
Consumption 11-15 square meters/kg(25 micron thick dry film meter)
above drying time was measured at ambient temperature of 25℃/70%).
The construction surface must be completely clean and dry and remove waxy grease and so on
Dry grinding of 320#sand paper.
Rough wood surface can be filled with waterborne wood putty
Primer Netflavor general water
sealant A series of net flavored waterborne wood primer
Topcoat CAMPUS HEALTH WATERBORNE WOOD COATINGS
Waterborne primer 2 times,waterborne finish 3-4 times
brush or ordinary spray(better effect).
Mixing ratio:Paint:clear water=1:0.05-0.2,
varnish is not higher than 10%,white.Lacquer is not more than 20%
|Solid wood and veneer furniture open coating construction technology|
|CODE||PROCESS||Material name||Construction method||Mark|
|1||White base processing||240mesh sanding paper||Hand polishing or machine Polishing||Flate, Handle delicate|
|2||Close||Waterborn sealing primer||Rub paint or brush paint||Dry for more than 4 hours(25℃)|
|3||Polish||320mesh sanding paper||Hand polishing or machine Polishing||Sand,remove rag|
|4||Ground coat||Water-based single/double componet primer||Spray paint or brush paint||Spary two crosses and dry at room temperature for 6 hours|
|5||Polish||800mesh sanding paper||Hand polishing or machine Polishing||Flat sand|
|6||Finishing coat||Water-based single/double componet paint||Spary paint||200mesh filter|
|7||Packaging||①25℃,relative humidity≦80%,after daying for 48 hours②after 40℃ bake 8 hours|
Matters Needing Attention
It is suggested that the construction temperature should be no less than 8℃,
the relative humidity is not higher than 80%,and the moisture content of wood should be less than 15%.
brush evenly,brush and brush gently along the wood grain.
Follow the principle of thin coating and multi-channel,disposable dry film.
The thickness should not exceed 30 microns,and the total thickness should not exceed 200 microns.
Avoid paiting before the paint is dried.In order to maitain better film effect,do not wear water.
After recoating,it must be thoroughly grind before painting.
Under normal circumstances,the curing period of the paint film is 7 days,but
the paint film is thicker or lower in temperature and humidity.
The curing period should be extended correspondingly while the curing period is not waxing,presing and rubbing.
After construction is completed,all kinds of utensils must be cleaned in time.
After use,the lid must be sealed and the product should not be stored at 5℃ or below.