No. A2713 Xinggang International Square Huangqi Jianshe Road Dali Town Nanhai District Foshan Guangdong China
Home ProductsWaterborne Wood Coatings

Nitrocellulose Base Wood Furniture Coating NC Wood Sanding Sealer 1L 3L 4L

Nitrocellulose Base Wood Furniture Coating NC Wood Sanding Sealer 1L 3L 4L

    • Nitrocellulose Base Wood Furniture Coating NC Wood Sanding Sealer 1L 3L 4L
    • Nitrocellulose Base Wood Furniture Coating NC Wood Sanding Sealer 1L 3L 4L
  • Nitrocellulose Base Wood Furniture Coating NC Wood Sanding Sealer 1L 3L 4L

    Product Details:

    Place of Origin: FoShan China
    Brand Name: Phresh/YiMei
    Certification: ISO SGS NQA ROHS
    Model Number: PHRESH-8024

    Payment & Shipping Terms:

    Minimum Order Quantity: Negotiable
    Price: Negotiable
    Packaging Details: 4.8KG,5KG,10KG,25KG
    Delivery Time: 7 days
    Payment Terms: 7days Western Union, T/T, L/C, MoneyGram
    Supply Ability: 10000KGS/DAY
    Contact Now
    Detailed Product Description
    Colors: Clear And Colorless Theoretical Coverage (mixed Complex: 12-14m2 /kg/coat
    Packing: 1L 3L 4L Touch Dry: 20min
    Hard Dry: 8 H Dilution Ratio (Base: Thinner): 1: 1

    Nitrocellulose Base Wood Furniture Coating NC Wood Sanding Sealer 1L 3L 4L


    Product Introduction
    This product is a kind of single component waterborne wood decorative paint.
    It is constructed by water thinning.It is safe,environmentally friendly and healthy.the product has excellent performance and has good decorative and protective properties for wood products.


    Scope of application:indoor wood

    products product characteristics

    low odor;low VOC;no free TDI.

    Excellent performance:strong adhesion;primer is good in grinding and filling;

    topcoat lacquer.The handle is slippery,high hardness,scratch resistance,water

    resistance,stain resistance and chemical resistance.Good,and resistant to yellowing.


    Easy construction:add water to dilute,brush and spray normally.

    Environmental performance:conform to indoor decoration and decoration

    materials waterborne wood coatings safety standard GB24410-2009


    Technical information
    Base materia  lacrylic copolymer
    Color:transparent,translucent,white and can be substituted for all kinds of colors.
    Luster:dumb,half light,light
    General dry film thickness:25 microns


    Consumption   11-15 square meters/kg(25 micron thick dry film meter)

    above drying time was measured at ambient temperature of 25℃/70%).


    Supporting products

    Primer Netflavor general water
    sealant A series of net flavored waterborne wood primer
    Basic coating

    system(varnish&white paint)

    Waterborne primer 2 times,waterborne finish 3-4 times


    Construction methods:

    brush or ordinary spray(better effect).

    Mixing ratio:Paint:clear water=1:0.05-0.2,

    weight ratio)recommended

    varnish is not higher than 10%,white.Lacquer is not more than 20%


    Solid wood and veneer furniture open coating construction technology
    CODE PROCESS Material name Construction method Mark
    1 White base processing 240mesh sanding paper Hand polishing or machine Polishing Flate, Handle delicate
    2 Close Waterborn sealing primer Rub paint or brush paint Dry for more than 4 hours(25℃)
    3 Polish 320mesh sanding paper Hand polishing or machine Polishing Sand,remove rag
    4 Ground coat Water-based single/double componet primer Spray paint or brush paint Spary two crosses and dry at room temperature for 6 hours
    5 Polish 800mesh sanding paper Hand polishing or machine Polishing Flat sand
    6 Finishing coat Water-based single/double componet paint Spary paint 200mesh filter
    7 Packaging     ①25℃,relative humidity≦80%,after daying for 48 hours②after 40℃ bake 8 hours


    Matters Needing Attention

    It is suggested that the construction temperature should be no less than 8℃,

    the relative humidity is not higher than 80%,and the moisture content of wood should be less than 15%.

    brush evenly,brush and brush gently along the wood grain.

    Follow the principle of thin coating and multi-channel,disposable dry film.

    The thickness should not exceed 30 microns,and the total thickness should not exceed 200 microns.

    Avoid paiting before the paint is dried.In order to maitain better film effect,do not wear water.

    After recoating,it must be thoroughly grind before painting.

    Under normal circumstances,the curing period of the paint film is 7 days,but

    the paint film is thicker or lower in temperature and humidity.

    The curing period should be extended correspondingly while the curing period is not waxing,presing and rubbing.

    After construction is completed,all kinds of utensils must be cleaned in time.

    After use,the lid must be sealed and the product should not be stored at 5℃ or below.

    Contact Details

    Contact Person: Tonney

    Tel: +8613760867636

    Send your inquiry directly to us (0 / 3000)

    Other Products