|No. A2713 Xinggang International Square Huangqi Jianshe Road Dali Town Nanhai District Foshan Guangdong Chinaemail@example.com|
|Place of Origin:||FoShan China|
|Certification:||ISO SGS NQA ROHS|
|Minimum Order Quantity:||Negotiable|
|Delivery Time:||7 days|
|Payment Terms:||7days Western Union, T/T, L/C, MoneyGram|
|Other Names:||No Benzene Anti Mildew Coating||State:||Liquid|
|Color:||Can Be Lcustomized||Function:||Anti Mildew|
|Construction Dosage:||10-12squar Metres/L||Application Methode:||Brush Spray Roller|
Fireproof Latex Based Interior Paint Waterborne Ceiling Paint Wear Resistant
Waterborne deluxe matte wall finish is an innovative clean flavor formula that makes the product more environmentally friendly and smells fresher. High-tech super wear-resistant factor in the paint film surface to form a unique structure of the protective layer, even after more repeated scrubbing, but also leave no traces, the wall has always been perfect as new. Super easy to wash + clean taste, clean and fresh at home.
Clean taste, environmental protection, anti-alkali, anti-mildew, long-lasting bright and beautiful, high covering power, Super scrub resistant ,easy to construct
Theoretical brush area
In theory, the product can be painted 10 to 12㎡/L / layer.The actual brush area will vary according to the construction method and the roughness of the surface.
New walls: clean the surface of dust, greasy and loose plaster.If there are gaps in the timely repair, to ensure that the wall clean dry and flat.
Repaint the wall :Uproot the flimsy paint film on the old wall.Remove surface powder and impurities.bulldoze, polish, clean and dry thoroughly.
Ensure that the surface humidity of the precoated substrate is≤ 10%.PH≥10.
The surface of the precoated substrate must be firm, dry, clean and flat and free of loose material.
Before finishing, the base shall be checked and accepted before finishing construction can be carried out.
Roll or spray can be used to paint usually need to be painted twice, under normal circumstances, each interval of at least two hours to dry.
This product should be diluted with water usually in 5 to 10 parts of paint plus one part of water(10%-15%).Do not dilute this product with more than 20% water at most.
Please refer to the construction guide.
|Analysis of common defects|
1, The primer is not dry enough to coat
2, Coating is too thick one time
1, Make sure the primer is fully dry
2, Don't brush it too thick at once
|Slow dry, Sticky||
1, Coating is too thick one time
2, The primer is not dry enough to coat 3, Substrate moisture content is too high 4, The ambient temperature is too high or too low
5, Poor ventilation in construction and drying environment
1, Don't brush it too thick at once
2, Make sure the primer is fully dry
3, Make sure the primer moisture content is in local average standards
4, Avoid construction under low temperature or high humidity
5, Ensure the construction and drying environment is well ventilated.
|Sags||1, Low viscosity coating, thick coating film 2,The spraying environment is too humid||
1, Adjust proper viscosity,Don't brush it too thick at once
2, Avoid construction under high humidity
|Oil spill||1, Low viscosity coating, thick coating film 2, The spraying environment is too humid||
1, Make sure the paint is clean
2, Make sure the undercoating is clean